PAINTING AND CAR BODY REPAIR
BAOHUA Rear Oblique Flow Bus Spray Booth
Bus spray booth with rear oblique airflow and electric infrared heating. Listed internal working space is 18,000 × 5,000 × 5,000 mm, with two 15 kW fans, a 380 V supply and an 80°C maximum drying temperature.
Supplied by Guangzhou BAOHUA, a Guangzhou-based automotive workshop equipment supplier with business roots dating back to 1998.
- Suitable for bus and commercial-vehicle refinishing
- Suitable for large-vehicle paint workshops
Final configuration, specifications, accessories, packaging, and delivery terms are confirmed in the quotation.
PRODUCT GALLERY
More product views
View additional angles and workshop photos supplied for this product.
TECHNICAL DATA
Specifications
Values below follow the supplied product listing. Confirm the final selected configuration before ordering.
Product specifications
| Product type | Bus spray booth |
|---|---|
| Internal dimensions | 18,000 × 5,000 × 5,000 mm |
| External dimensions | 19,300 × 5,100 × 5,500 mm |
| Airflow configuration | Rear oblique flow |
| Heating system | Electric infrared heating |
| Maximum drying temperature | 80°C |
| baking temperature | 80°c |
| Max. Drying Temperature | 80 °C |
| Lighting | Explosion-proof lighting |
| lighting system | explosion proof lighting |
| Power supply | 380 V |
| Fan power | 2 × 15 kW |
| Illuminance | ≥1,000 lux |
| External Size | 19300*5100*5500mm |
| Internal Size(L*B*H) | 18000*5000*5000mm |
| Fans | 2pcs 15KW fans |
| Brightness | ≥1000 LUX |
Installation requirements
Confirm the working dimensions, airflow and filtration configuration, exhaust route, electrical supply, heating source, fire protection, compressed air, foundation, and local environmental requirements before ordering.
Commercial information
Warranty: 36 months
Product overview
The BAOHUA Rear Oblique Flow Bus Spray Booth is designed for refinishing buses and commercial vehicles in large-vehicle paint workshops. Its rear oblique airflow arrangement is paired with electric infrared heating, a 380 V supply and a maximum drying temperature of 80°C. The listed internal working space is 18,000 × 5,000 × 5,000 mm, while external dimensions are 19,300 × 5,100 × 5,500 mm.
Two 15 kW fans and illumination of at least 1,000 lux form part of the specified booth configuration. Confirm vehicle clearance, exhaust routing, filtration, electrical capacity and local installation requirements when planning the paint bay.
Planning a commercial-vehicle paint bay
Send the longest, widest and tallest vehicle dimensions, together with the proposed vehicle approach and workshop plan. The 18,000 × 5,000 × 5,000 mm internal booth dimensions describe the working enclosure, not a maximum vehicle size: space is also needed for painting access and movement around the vehicle. Allow for the separate 19,300 × 5,100 × 5,500 mm external booth dimensions and confirm additional installation, duct and service clearances against the final project drawing.
Confirming the heating and site connections
Provide the local electrical supply, available capacity, exhaust route and intended spraying and drying workflow. The two 15 kW fans are fan ratings, not the total input of the infrared-heated booth. Ask the quotation to confirm heating power, total connected load, phase, frequency, filtration and the required site connections before specifying workshop utilities.
BUYER SEARCH GUIDE
Automotive spray booth sourcing guide
These systems are used for vehicle refinishing, paint application, baking or drying, and controlled preparation work in collision-repair facilities.
Common sourcing language
Importers, distributors, and workshop buyers may describe BAOHUA Rear Oblique Flow Bus Spray Booth using these related terms:
- automotive spray booth
- car paint booth
- spray bake oven
- vehicle painting room
What to compare before ordering
When sourcing a car paint booth or spray bake oven, compare internal and external dimensions, door opening, airflow design, supply and exhaust volume, filtration, heating method, operating temperature, lighting, wall construction, total power, voltage, and installation conditions. Final airflow and heating configuration should follow the project specification.
View PAINTING AND CAR BODY REPAIR
Compare related models and choose the configuration that matches your vehicles, process, utilities, and workshop layout.
View categoryBUYER FAQ
Bus spray booth FAQ
Review the confirmed product data and the project information needed before requesting a final configuration.
What internal booth size is stated?
The supplied specification states internal dimensions of 18,000 x 5,000 x 5,000 mm.
What external size is listed?
The source specification lists external dimensions of 19,300 x 5,100 x 5,500 mm.
What airflow layout is described?
The product listing describes a rear oblique-flow configuration for the bus spray booth.
How is the booth heated?
The supplied data states electric infrared heating and a maximum drying temperature of 80 C.
What electrical information is listed?
The source data lists 380 V power and two 15 kW fan motors. Confirm phase, frequency, total connected load, and local requirements.
What project information is needed for a quotation?
Provide vehicle dimensions, coating process, site plans, power, climate, exhaust route, fire-safety rules, civil works, installation scope, and destination.