PAINTING AND CAR BODY REPAIR
BAOHUA BH5621 3.5T Tilting Body Frame Straightening Machine
Model: BH5621
BH5621 body frame straightening bench with a 5600 × 2100 mm tilting platform, 3500 kg vehicle capacity, 100 kN pulling force and two pulling towers.
Supplied by Guangzhou BAOHUA, a Guangzhou-based automotive workshop equipment supplier with business roots dating back to 1998.
- 5600 × 2100 mm platform; 520 mm platform height
- 3500 kg maximum vehicle load
- 100 kN maximum pulling force
- 360° tower working range
- Hydraulic tilting platform and square-hole steel deck
Final configuration, specifications, accessories, packaging, and delivery terms are confirmed in the quotation.
PRODUCT DETAILS
Features, construction, and applications
Review the available product detail images for the selected equipment.
TECHNICAL DATA
Specifications
Values below follow the supplied product listing. Confirm the final selected configuration before ordering.
Product specifications
| Model | BH5621 |
|---|---|
| Product type | Hydraulic tilting body frame straightening bench |
| Required air pressure | 0.8 MPa |
| Maximum hydraulic working pressure | 70 MPa |
| Platform length | 5600 mm |
| Platform width | 2100 mm |
| Platform height | 520 mm |
| Maximum vehicle load | 3500 kg |
| Maximum pulling force | 100 kN |
| Tower working range | 360° |
| Platform material | Manganese-steel plate, as described in the brochure |
| Pulling towers | 1 main tower + 1 auxiliary tower |
| Vehicle anchoring clamps | 4 |
| Air-hydraulic pumps | 2 × 2.3 L |
Installation requirements
Confirm vehicle weight and anchoring compatibility, floor/support conditions, loading-ramp access and tower clearance. Provide the specified 0.8 MPa air supply and follow the hydraulic-system instructions. Confirm measuring equipment and the final supplied accessory list separately.
Commercial information
Warranty: 3 years
Product overview
The BAOHUA BH5621 is a hydraulic tilting body frame straightening bench for compatible vehicle collision repair and chassis correction. The selected configuration has a 5600 × 2100 mm platform, a 520 mm platform height and a maximum vehicle load of 3500 kg. A main pulling tower and an auxiliary pulling tower work with the anchoring clamps and repair attachments listed below.
Platform construction and vehicle access
The supplied brochure describes a manganese-steel plate platform with four rows of square anchoring holes and a CNC flame-cut work surface. Its open-center layout provides access for positioning repair tools. Hydraulic single-end tilting, platform supports and the supplied loading ramps assist vehicle loading and unloading. Set up and secure the equipment according to the operating instructions; it is not a general-purpose vehicle lift.
Pulling towers and anchoring clamps
- The brochure lists a 360° tower working range around the platform.
- A rolling mechanism supports repositioning of the pulling towers along the platform track.
- Maximum listed pulling force is 100 kN. This is a force rating, not the 3500 kg vehicle-load rating.
- Four anchoring clamps are listed. The screw-adjustment design allows height adjustment while the jaws remain level.
- Match anchoring points, clamps, chains and pull direction to the vehicle structure and approved repair procedure.
Hydraulic and air requirements
The brochure specifies 0.8 MPa required air pressure and 70 MPa maximum hydraulic-system working pressure. These are different circuits and must not be interchanged. Two 2.3 L air-hydraulic pumps and two hydraulic hoses are listed in the package. Confirm pump connections, hose ratings and operating procedures before commissioning. No electrical input rating is established by the new brochure.
Platform and equipment package
- Platform: 1 pc.
- Main pulling tower: 1 pc.
- Auxiliary pulling tower: 1 pc.
- Platform supports: 2 pcs.
- Loading ramps: 2 pcs.
- Vehicle anchoring clamps: 4 pcs.
- Tool trolley: 1 pc.
- Loading trays: 2 pcs.
- Air-hydraulic pumps (2.3 L): 2 pcs.
- Hydraulic hoses: 2 pcs.
- Clamp bolt-and-nut assemblies: 8 pcs.
- Tower locking pins: 4 pcs.
Pulling tools, chains and fittings
- Long chains: 2 pcs.
- Pull-down device: 1 pc.
- Large curved hook (brochure designation: 1–3): 1 pc.
- Small curved hook: 1 pc.
- Short chain: 1 pc.
- Clevis hook: 1 pc.
- Anchoring-clamp wrench: 1 pc.
- Mini pulling clamp: 1 pc.
- Wide pulling clamp: 1 pc.
- C-type pulling clamp: 1 pc.
- Right-angle pulling clamp: 1 pc.
- Pointed-jaw pulling clamp: 1 pc.
- Strut-tower pulling adapter: 1 pc.
- Chain hook plate: 1 pc.
- Quick pulling plate: 1 pc.
- Crescent wrench: 1 pc.
- Chain shortener: 1 pc.
- Tool-trolley hooks: 16 pcs.
- Star handles: 2 pcs.
- Nylon strap: 1 pc.
- Steel wire rope: 1 pc.
- Chain safety cable: 1 pc.
Quantities above follow the supplied brochure configuration table. The photographs show the equipment and accessory trolley; tool finish and arrangement can vary from the illustrations. Confirm the final itemized supply list with the order rather than inferring extra items from a photograph.
Applications and repair-bay planning
The BH5621 is intended for compatible passenger-vehicle collision-repair workshops, body anchoring and controlled chassis or body straightening. Check vehicle weight, dimensions, anchoring-point suitability and the required repair procedure. Plan space beyond the 5600 × 2100 mm platform for vehicle approach, ramps, tower travel, hoses and operator access. Use the installation instructions to confirm floor, support and anchoring requirements. Vehicle measurement and repair acceptance require an appropriate measuring method; a measuring system is not established as included by this brochure.
Dimensions, packing and configuration confirmation
The 5600 × 2100 × 520 mm figures describe the platform, not the overall operating envelope or shipping crate. Packed dimensions, net and gross shipment weights, packaging method and measuring-equipment supply require order-specific confirmation. The blue/yellow and dark-finish photographs illustrate the supplied equipment; confirm the ordered finish.
Maintenance and accessory selection
Keep the platform, tower track and clamp mechanisms accessible for inspection. Inspect hydraulic hoses, pulling chains, hooks, anchoring clamps and safety attachments in accordance with the equipment instructions. Do not exceed the rated capacity of any component or substitute an unverified pulling attachment.
MODEL SELECTION
How to choose this equipment
Selection guidance
- Vehicle anchoring and repair tasks
- Send vehicle weight and overall dimensions, anchoring-point photographs and the intended pulling tasks. Check the 3,500 kg vehicle load separately from the 100 kN pulling-force rating. Ask which clamps and pulling attachments match the vehicle structure and repair procedure.
- Repair-bay layout and loading approach
- Provide a measured bay drawing showing the vehicle approach, ramps, tower movement and operator paths around the 5,600 × 2,100 mm platform. Request the installation drawing before preparing supports or anchoring; the platform footprint is not the complete operating area.
- Air-hydraulic package and quotation scope
- Confirm the connections for the listed 0.8 MPa air supply, the two air-hydraulic pumps and the itemized tool package. Specify the measuring equipment you already use, required accessories, quantity and destination; a body measuring system is not established as part of this brochure package.
BUYER SEARCH GUIDE
BH5621 body frame straightening bench selection
For compatible passenger-vehicle collision repair, anchoring and controlled body or chassis straightening. Confirm the measuring equipment separately.
Common sourcing language
Importers, distributors, and workshop buyers may describe BAOHUA BH5621 3.5T Tilting Body Frame Straightening Machine using these related terms:
- BH5621 frame straightening machine
- 3.5 ton body frame machine
- hydraulic tilting collision repair bench
- 5600 mm frame repair platform
What to compare before ordering
Confirm vehicle weight, anchoring fit, repair procedure, 0.8 MPa air supply, tower travel and workspace. Maximum pulling force is 100 kN, distinct from the 3500 kg vehicle capacity.
View PAINTING AND CAR BODY REPAIR
Compare related models and choose the configuration that matches your vehicles, process, utilities, and workshop layout.
View categoryBUYER FAQ
BH5621 body frame machine FAQ
Review the confirmed product data and the project information needed before requesting a final configuration.
What platform size and vehicle load apply?
BH5621 uses a 5600 × 2100 mm platform, 520 mm platform height and a maximum vehicle load of 3500 kg.
Is pulling force the same as vehicle capacity?
No. Maximum pulling force is 100 kN; maximum vehicle load is 3500 kg. These are different ratings.
Which towers and pumps are listed?
One main pulling tower, one auxiliary pulling tower and two 2.3 L air-hydraulic pumps are listed in the supplied brochure.
What air and hydraulic pressures are specified?
Required air pressure is 0.8 MPa. Maximum hydraulic-system working pressure is 70 MPa. Do not interchange these different circuit ratings.
Is a measuring system included?
The supplied brochure does not establish a measuring system as included. Confirm the measuring method and supplied equipment separately.
Are platform dimensions packing dimensions?
No. Platform dimensions are not the shipping crate size or total working envelope. Request order-specific packing dimensions and net and gross weights.