PAINTING AND CAR BODY REPAIR
BAOHUA Diesel-Heated Automotive Spray Booth
A diesel-heated automotive spray booth with a Baltur heating system, LED lighting and three-stage filtration for vehicle painting and paint baking. The listed interior is 6,900 × 3,900 × 2,650 mm; send your vehicle dimensions and workshop plan for configuration and quotation.
Supplied by Guangzhou BAOHUA, a Guangzhou-based automotive workshop equipment supplier with business roots dating back to 1998.
- External Dimensions: 7000 x 5400 x 3450 mm
- Interior Dimensions: 6900 x 3900 x 2650 mm
- Entry Door Dimensions: 3400 x 2450 mm (W x H)
- Air Supply Volume: 25000 m³/h
- Exhaust Volume: 25000 m³/h
Final configuration, specifications, accessories, packaging, and delivery terms are confirmed in the quotation.
PRODUCT GALLERY
More product views
View additional angles and workshop photos supplied for this product.
TECHNICAL DATA
Specifications
Values below follow the supplied product listing. Confirm the final selected configuration before ordering.
Product specifications
| Product type | Automotive spray booth |
|---|---|
| Booth dimensions | Customizable |
| External Dimensions | 7000 x 5400 x 3450 mm |
| Heating System | Baltur diesel heating system, Italy |
| Maximum Operating Temperature | 80 °C |
| Heating Rate | 20-60 °C in 6-8 minutes |
| baking temperature | 80°c |
| filter | environmental 3 filter process |
| Lighting | LED lighting |
| lighting system | Led Lighting |
| Total Power | 16 kW |
| Total Weight | 2.2 t |
| Input Voltage | 380 V |
| Phase | Three phase |
| Frequency | 50 Hz |
| Interior Dimensions | 6900 x 3900 x 2650 mm |
| Entry Door Dimensions | 3400 x 2450 mm (W x H) |
| Air Supply Volume | 25000 m³/h |
| Exhaust Volume | 25000 m³/h |
| Inlet Fans | 2 x 4 kW |
| Exhaust Fan | 1 x 7.5 kW |
| Side Wall Thickness | 50 mm |
| Average Air Speed | ≥ 0.35 m/s at full load |
| Noise Level | ≤ 80 dB |
| Illumination | ≥ 800 lux |
| Air Filtration Efficiency | > 98% |
| Wall Panel Core | Rock wool |
| Filtration | Three-stage filtration |
| External Size | Customized |
Installation requirements
Confirm the working dimensions, airflow and filtration configuration, exhaust route, electrical supply, heating source, fire protection, compressed air, foundation, and local environmental requirements before ordering.
Commercial information
Warranty: 3 years
Product overview
BAOHUA's diesel-heated automotive spray booth combines a Baltur diesel heating system, LED lighting and three-stage filtration for vehicle spray painting and paint baking. The interior measures 6,900 x 3,900 x 2,650 mm, with a 3,400 x 2,450 mm entry door. Specified air supply and exhaust volumes are each 25,000 m³/h, and maximum operating temperature is 80°C.
The configuration uses 380 V three-phase, 50 Hz power and rock-wool wall panels. Confirm vehicle dimensions, exhaust routing, fuel arrangements and the coating process when planning the installation.
Check the vehicle envelope before requesting a booth quotation
The listed 6,900 × 3,900 × 2,650 mm interior and 3,400 × 2,450 mm entry opening describe this configuration. The interior length is not the maximum comfortable vehicle length: leave working access around the vehicle and confirm the final arrangement on the project drawing. Send the largest vehicle dimensions, available building space and a marked entrance position.
Separate diesel heating from electrical requirements
Diesel is used by the heating system; the booth still requires electrical power for its equipment. The listed configuration uses 380 V, three-phase, 50 Hz power. Include your site voltage, phase and frequency in the inquiry rather than assuming a diesel-heated booth needs no electrical connection.
Define the quotation scope
- Supply the destination country, quantity and delivery point.
- Request confirmation of the booth drawing, heating configuration, exhaust arrangement and installation scope.
- Ask which filters, spare parts and installation documents are included.
- Confirm fuel and electrical connections with the installer before ordering.
MODEL SELECTION
How to choose this equipment
Selection guidance
- Vehicle access and painting workspace
- Compare vehicle dimensions with the listed 6,900 × 3,900 × 2,650 mm interior and 3,400 × 2,450 mm entry door. Include space for the painting process and operator access in the project review; do not use the exterior footprint as usable interior space.
- Comparing diesel heating configurations
- The listed configuration uses a Baltur diesel heating system. Ask the quotation to identify the burner model, fuel requirements and heat-exchanger arrangement. Request fuel-use estimates for your planned operating cycle and ambient conditions so different proposals can be compared on the same basis.
- Preparing a body-shop installation
- Send the workshop plan, available height, vehicle entry route and intended exhaust route. Check the listed 380 V, three-phase, 50 Hz supply against the site and confirm foundation, ducting, fuel-system and local project requirements before finalizing the configuration.
- Confirming the supply and installation scope
- Request an itemized proposal covering the booth, heating system, filtration, lighting, controls and agreed accessories. Identify packing, freight, site work, installation, commissioning and replacement-filter requirements separately, with quantity and destination stated in the inquiry.
BUYER SEARCH GUIDE
Automotive spray booth sourcing guide
These systems are used for vehicle refinishing, paint application, baking or drying, and controlled preparation work in collision-repair facilities.
Common sourcing language
Importers, distributors, and workshop buyers may describe BAOHUA Diesel-Heated Automotive Spray Booth using these related terms:
- automotive spray booth
- car paint booth
- spray bake oven
- vehicle painting room
What to compare before ordering
When sourcing a car paint booth or spray bake oven, compare internal and external dimensions, door opening, airflow design, supply and exhaust volume, filtration, heating method, operating temperature, lighting, wall construction, total power, voltage, and installation conditions. Final airflow and heating configuration should follow the project specification.
View PAINTING AND CAR BODY REPAIR
Compare related models and choose the configuration that matches your vehicles, process, utilities, and workshop layout.
View categoryBUYER FAQ
Diesel-heated spray booth FAQ
Review the confirmed product data and the project information needed before requesting a final configuration.
What booth and door dimensions are confirmed?
External dimensions are 7000 x 5400 x 3450 mm, interior dimensions are 6900 x 3900 x 2650 mm, and the entry door is 3400 x 2450 mm (W x H).
What airflow and fan configuration are confirmed?
Air supply and exhaust volumes are each 25000 m3/h, using two 4 kW inlet fans and one 7.5 kW exhaust fan.
What heating performance is specified?
The booth uses an Italian Baltur diesel heating system, reaches a maximum operating temperature of 80 °C, and is stated to heat from 20 to 60 °C in 6-8 minutes.
What air quality and working conditions are stated?
The specification states ≥0.35 m/s average air speed at full load, ≤80 dB noise, ≥800 lux illumination, and >98% filtration efficiency.
What construction and electrical data are confirmed?
The booth uses 50 mm side walls with rock-wool core, 16 kW total power, 2.2 t total weight, and 380 V three-phase 50 Hz supply.
What information is needed for a quotation?
Provide vehicle dimensions, throughput, paint system, climate, diesel supply, required Baltur burner model and fuel consumption, foundation, ducting, local rules, installation scope, and destination.