PAINTING AND CAR BODY REPAIR
BAOHUA Electric Heating Automotive Spray Booth
Model: Electric Heating Spray Booth
An electrically heated automotive spray booth with LED lighting, three-stage filtration and an 80°C maximum drying temperature for vehicle refinishing workshops.
Supplied by Guangzhou BAOHUA, a Guangzhou-based automotive workshop equipment supplier with business roots dating back to 1998.
- Minimum order
- 1 unit
- Electric heating system with 43 kW rated power
- LED ceiling lighting
- Three-stage environmental filtration
- Maximum drying temperature of 80°C
- Typical heating time of 5–10 minutes
Final configuration, specifications, accessories, packaging, and delivery terms are confirmed in the quotation.
PRODUCT GALLERY
More product views
View additional angles and workshop photos supplied for this product.
TECHNICAL DATA
Specifications
Values below follow the supplied product listing. Confirm the final selected configuration before ordering.
Product specifications
| Product type | Automotive spray booth |
|---|---|
| Heating system | Electric heating |
| Maximum drying temperature | 80°C |
| Heating time | 5–10 minutes |
| baking temperature | 80°c |
| Max. Drying Temperature | 80 °C |
| filter | environmental 3 filter process |
| Ceiling lighting | 10 groups of LED lights |
| lighting system | Led Lighting |
| Ceiling Lightings | 10 groups |
| Rated power | 43 kW |
| Exhaust fan power | 5.5 kW |
| Power | 43kw |
| Supply voltage | 220 V / 380 V |
| Voltage | 220v/380v |
| Wall panel | 50 mm EPS foam composite board |
| Door size | 800 × 1,800 mm |
| Floor apron height | 270 mm |
| Roof | Galvanized sheet metal bending |
| Wall | 50mm. EPS foam composite board. Double-sided 0.3mm |
| Exhaust Air | 5.5kw |
Installation requirements
Confirm the final booth dimensions, available 220 V or 380 V power supply, ventilation duct route, floor conditions and local electrical requirements before ordering.
Commercial information
Warranty: 3 years
Lead time: Confirm with BAOHUA sales
Product overview
BAOHUA's electric heating automotive spray booth is designed for vehicle refinishing, paint application and baking in collision repair workshops. The specified configuration combines electric heating, three-stage filtration and ten groups of LED ceiling lights. Rated power is 43 kW, exhaust fan power is 5.5 kW and maximum drying temperature is 80°C.
The booth uses 50 mm EPS composite wall panels, with listed 220 V or 380 V supply options. Match the booth configuration to the vehicles, coating process and workshop layout, and confirm electrical capacity, ventilation, ducting and local installation requirements before ordering.
Project information to confirm before ordering
For an electric-heated automotive spray booth quotation, provide the largest vehicle dimensions, workshop floor plan, planned spray and drying workflow, and the intended booth location. The listed configuration specifies 43 kW rated power, a 5.5 kW exhaust fan and 220 V or 380 V options; confirm the final voltage, phase and frequency against the site supply. Ask the supplier to confirm the final booth drawing, air-intake and exhaust-duct interfaces, and the installation requirements that apply to the project and local regulations.
Vehicle and power fit
As a project-fit reference, a booth with an approximately 4 m internal width has about 3.4 m of usable interior width. Vehicles about 2.0–2.5 m wide can be accommodated with room for people to walk along the sides. A vehicle length of about 5.5–6.0 m is the recommended range for comfortable spray and baking work; around 6.3 m is an approximate absolute limit and would leave very tight front and rear clearance. Confirm the actual booth layout and vehicle clearances on the project drawing before ordering.
Three-phase power can be configured for 220 V, 380 V or 415 V. Confirm the selected voltage, phase, frequency and available site capacity against the final 43 kW booth configuration before order.
BUYER SEARCH GUIDE
Automotive spray booth sourcing guide
These systems are used for vehicle refinishing, paint application, baking or drying, and controlled preparation work in collision-repair facilities.
Common sourcing language
Importers, distributors, and workshop buyers may describe BAOHUA Electric Heating Automotive Spray Booth using these related terms:
- automotive spray booth
- car paint booth
- spray bake oven
- vehicle painting room
What to compare before ordering
When sourcing a car paint booth or spray bake oven, compare internal and external dimensions, door opening, airflow design, supply and exhaust volume, filtration, heating method, operating temperature, lighting, wall construction, total power, voltage, and installation conditions. Final airflow and heating configuration should follow the project specification.
View PAINTING AND CAR BODY REPAIR
Compare related models and choose the configuration that matches your vehicles, process, utilities, and workshop layout.
View categoryBUYER FAQ
Electric heating spray booth FAQ
Review the confirmed product data and the project information needed before requesting a final configuration.
What maximum drying temperature is stated?
The supplied specification states a maximum drying temperature of 80 C.
What heating time is listed?
The source data lists a heating time of 5-10 minutes under the stated configuration.
What rated power is stated?
The product specification lists 43 kW rated power and a 5.5 kW exhaust fan.
What supply voltage is listed?
The source listing states 220 V or 380 V. Confirm phase, frequency, connected load, and destination electrical standards.
What wall and lighting construction is described?
The listing states 50 mm EPS foam composite wall panels and ten groups of LED ceiling lights.
What information is needed for a quotation?
Provide vehicle dimensions, paint and drying process, site plan, electrical capacity, climate, exhaust, fire rules, civil works, installation scope, and destination.