PAINTING AND CAR BODY REPAIR
BAOHUA FYMIG200L Double Pulse Aluminium MIG Welder
Model: FYMIG200L
FYMIG200L IGBT inverter double-pulse MIG welder for aluminium body repair, with DSP parameter matching, four-roll wire feed and 200 A at 100% duty cycle.
Supplied by Guangzhou BAOHUA, a Guangzhou-based automotive workshop equipment supplier with business roots dating back to 1998.
- Minimum order
- 1 set
- IGBT inverter double-pulse and soft-switching technology
- DSP parameter matching and automatic memory
- Four-roll wire feeder
- 200 A at 100% duty cycle; 260 A at 65%
- 400 V or 230 V ordered input configuration
Final configuration, specifications, accessories, packaging, and delivery terms are confirmed in the quotation.
PRODUCT DETAILS
Features, construction, and applications
Review the available product detail images for the selected equipment.
TECHNICAL DATA
Specifications
Values below follow the supplied product listing. Confirm the final selected configuration before ordering.
Product specifications
| Model | FYMIG200L |
|---|---|
| Input voltage (±15%) | 400 V or 230 V; confirm ordered configuration |
| Rated input power | 8 kVA |
| Rated input current | 11 A / 25 A |
| Power factor | ≥0.95 |
| No-load output voltage | 50 V |
| Machine weight | 75 kg |
| Welding technology | IGBT inverter double-pulse MIG |
| Output range | 35 A / 15.7 V – 260 A / 26 V |
| Duty cycle | 200 A at 100%; 260 A at 65% |
| Efficiency | ≥90% |
| Insulation grade | F |
| Steel wire diameter | 0.6–1.2 mm |
| Aluminium-alloy wire diameter | 1.0–1.2 mm |
| Copper-alloy wire diameter | 0.6–1.2 mm |
| Wire feeder | Four-roll drive |
| Main machine dimensions | 106 × 50 × 113 cm |
Installation requirements
Confirm ordered 400 V or 230 V supply, phase, frequency, grounding and circuit protection against the machine nameplate. Provide suitable ventilation, welding shielding and operator PPE.
Commercial information
Warranty: 3 years
Lead time: Confirm with BAOHUA sales
Product overview
The FYMIG200L is an IGBT inverter double-pulse MIG welder for aluminium vehicle-body repair and compatible fabrication work. Its four-roll wire feeder, DSP-controlled settings and automatic parameter memory support workshop welding setup. This page covers FYMIG200L only; specifications below follow its column in the supplied brochure.
Double-pulse inverter welding
The brochure describes IGBT inverter double-pulse and soft-switching technology for steady welding and fast arc ignition, with reduced spatter and welding deformation. Actual results depend on material, joint preparation, shielding gas, wire and operator settings. Select the process according to the vehicle repair procedure and welding requirements.
DSP controls and automatic memory
- Select welding material and workpiece thickness for automatic parameter matching.
- The control panel provides welding-material, welding-mode, wire-diameter and welding-setting selections.
- Automatic memory stores welding parameters to support repeat setup.
- Four-roll drive is specified for the wire feeder.
Output and duty cycle
The stated output range is 35 A / 15.7 V to 260 A / 26 V. The brochure lists 200 A at 100% duty cycle and 260 A at 65% duty cycle, with 50 V no-load output voltage. The source does not state the duty-cycle test temperature or standard. Do not interpret the maximum output as a continuous-duty rating.
Wire sizes and optional consumables
- Steel welding wire: 0.6–1.2 mm diameter.
- Aluminium-alloy welding wire: 1.0–1.2 mm diameter.
- Copper-alloy welding wire: 0.6–1.2 mm diameter.
- Optional C035 aluminium-alloy wire, C036 steel wire and C037 copper-alloy wire are illustrated in the brochure.
Choose the wire alloy, shielding gas, liner and drive rollers for the specific material and joint. A listed wire range does not establish compatibility with every vehicle alloy or repair process.
Optional welding guns
- C033F aluminium welding gun: 15AK, as labelled in the brochure.
- C007D multifunction welding gun: 15AK / 24AK / 36AK options, as labelled.
- C034 spool gun: listed at 250 A.
These items appear in the brochure's optional section. They are not automatically included with every machine. Confirm torch type, connections, cable length, consumables and quantities in the quotation.
Electrical supply and workshop preparation
The brochure lists 400 V or 230 V input with ±15% tolerance, 8 kVA rated input power and 11 A / 25 A rated input current. Confirm the ordered voltage configuration, phase, frequency, circuit protection and grounding against the machine nameplate before installation; the brochure does not establish automatic voltage switching. Provide suitable welding ventilation, shielding and operator protection.
Machine size and delivery information
Main machine dimensions are 106 × 50 × 113 cm and the listed machine weight is 75 kg. These are not packed dimensions or shipment gross weight. Packing dimensions, gross weight and the final supplied accessory list require the order-specific packing list.
Applications
The FYMIG200L is intended for aluminium automotive body welding, collision-repair workshops and compatible fabrication tasks. Specify material alloy and thickness, joint type, wire and gas, workshop supply and required torch package when requesting a quotation.
MODEL SELECTION
How to choose this equipment
Selection guidance
- Material, joint and wire setup
- Send the material alloy, thickness, joint type and vehicle repair procedure, together with the intended wire diameter and shielding gas. Confirm the matching liner and drive rollers for the four-roll feeder instead of selecting on maximum output current alone.
- Duty cycle and workshop power
- State the expected welding current and working pattern. Compare the listed 200 A at 100% and 260 A at 65% duty cycles, and ask for their test conditions. Specify the ordered 230 V or 400 V configuration and confirm phase, frequency and circuit requirements; automatic voltage switching is not established.
- Torch package and shipment scope
- Choose the required torch arrangement and cable reach for the repair bay. The brochure lists welding guns and wire in its optional section, so request an itemized quotation for torches, connections and consumables. Confirm packed dimensions and gross weight separately from the 75 kg machine weight.
BUYER SEARCH GUIDE
FYMIG200L aluminium MIG welding selection
For aluminium automotive body welding, collision-repair workshops and compatible fabrication. DSP parameter matching, automatic setting memory and four-roll wire feed support process setup.
Common sourcing language
Importers, distributors, and workshop buyers may describe BAOHUA FYMIG200L Double Pulse Aluminium MIG Welder using these related terms:
- FYMIG200L aluminium MIG welder
- double pulse MIG welding machine
- IGBT inverter aluminium welder
- four-roll wire feeder MIG welder
What to compare before ordering
Match the material alloy, thickness, wire and shielding gas to the repair procedure. Confirm the ordered 400 V or 230 V supply, circuit requirements and optional torch package. FYMIG200L is rated at 200 A at 100% duty cycle or 260 A at 65% in the supplied brochure.
View PAINTING AND CAR BODY REPAIR
Compare related models and choose the configuration that matches your vehicles, process, utilities, and workshop layout.
View categoryBUYER FAQ
Aluminium MIG welder FAQ
Review the confirmed product data and the project information needed before requesting a final configuration.
Which model does this page cover?
This page covers FYMIG200L, an IGBT inverter double-pulse MIG welder with DSP controls, automatic parameter memory and four-roll wire drive.
Which wire diameters are listed?
Steel and copper-alloy wire: 0.6–1.2 mm. Aluminium-alloy wire: 1.0–1.2 mm. Match wire alloy, gas and torch to the intended repair.
What duty cycle is stated?
FYMIG200L is listed at 200 A at 100% and 260 A at 65% duty cycle. The brochure does not specify test temperature or standard.
What electrical input is listed?
400 V or 230 V with ±15% tolerance, 8 kVA rated input power and 11 A / 25 A rated input current. Confirm the ordered configuration, phase and frequency against the nameplate.
What size and weight are listed?
Main machine dimensions are 106 × 50 × 113 cm and machine weight is 75 kg. These are not packed dimensions or shipment gross weight.
Are all pictured welding guns included?
No. C033F aluminium gun, C007D multifunction gun and C034 250 A spool gun appear in the optional section. Confirm the supplied package in the quotation.