PAINTING AND CAR BODY REPAIR
BAOHUA FYMIG230XL Pulsed MIG/MAG Welder
Model: FYMIG230XL
FYMIG230XL multifunctional pulsed MIG/MAG welding center with single-pulse, double-pulse and MMA modes, material-based parameter matching, DSP control and automatic setting memory.
Supplied by Guangzhou BAOHUA, a Guangzhou-based automotive workshop equipment supplier with business roots dating back to 1998.
- Single-pulse, double-pulse and MMA modes
- Automatic parameter matching by material and wire diameter
- DSP control with automatic setting memory
- Four-roller wire feeder
- 220 V input; 7.7 kVA rated input power
Final configuration, specifications, accessories, packaging, and delivery terms are confirmed in the quotation.
PRODUCT DETAILS
Features, construction, and applications
Review the available product detail images for the selected equipment.
TECHNICAL DATA
Specifications
Values below follow the supplied product listing. Confirm the final selected configuration before ordering.
Product specifications
| Model | FYMIG230XL |
|---|---|
| Input voltage | 220 V ±15%, 50/60 Hz |
| Rated input power | 7.7 kVA |
| Rated input current | 30 A |
| Power factor | ≥0.75 |
| No-load output voltage | 69 V |
| Weight | 40 kg |
| Welding modes | Single pulse, double pulse and MMA |
| Output range | 30 A / 15.7 V – 200 A / 26 V |
| Duty cycle | 160 A at 100%; 200 A at 65% |
| Efficiency | ≥90% |
| Steel wire diameter | 0.6–1.2 mm |
| Aluminium alloy wire diameter | 0.8–1.2 mm |
| Copper alloy wire diameter | 0.6–1.2 mm |
| Wire feeder | Four rollers |
| Dimensions | 380 × 850 × 810 mm |
Installation requirements
Provide the specified 220 V ±15%, 50/60 Hz supply, grounding and electrical protection appropriate to 7.7 kVA / 30 A input. Select suitable wire, shielding gas, torch and consumables for the material and process. Provide fume extraction and appropriate protective equipment. Confirm duty-cycle conditions and the accessory package before ordering.
Product overview
The BAOHUA FYMIG230XL is a multifunctional high-speed pulsed MIG/MAG welding center for automotive body repair and fabrication. It supports single-pulse, double-pulse and manual metal arc (MMA) welding modes.
PARAMETER MATCHING AND MEMORY Select the workpiece material and wire diameter to obtain automatically matched welding parameters. DSP control and automatic parameter memory help operators retain settings for repeat work.
CONTROL PANEL The display provides welding mode, material, wire diameter, welding process and parameter information. Front controls provide access to welding settings, voltage and current.
WORKSHOP DESIGN A four-roller wire feeder supports wire delivery. The wheeled housing incorporates a top storage tray for accessories and small parts. The brochure lists steel and copper-alloy wire diameters of 0.6–1.2 mm and aluminium-alloy wire diameters of 0.8–1.2 mm. Select wire, shielding gas and process for the actual material and joint.
ELECTRICAL AND OUTPUT DATA The specified input is 220 V ±15%, 50/60 Hz, with 7.7 kVA rated input power and 30 A rated input current. The listed output range is 30 A / 15.7 V to 200 A / 26 V. Duty-cycle ratings are 160 A at 100% and 200 A at 65%.
MODEL SELECTION
How to choose this equipment
Selection guidance
- Material, wire and welding process
- Describe the panel or workpiece material, joint and required welding mode. The brochure lists steel and copper-alloy wire diameters of 0.6–1.2 mm and aluminium-alloy wire diameters of 0.8–1.2 mm. Confirm the matching wire, shielding gas, torch and procedure for the actual repair or fabrication task.
- Matching the duty cycle to the work
- Compare the planned welding current and work sequence with the listed 160 A at 100% and 200 A at 65% duty-cycle ratings. The model name is not an output-current rating. Confirm the applicable test conditions and operating instructions when planning repeated work.
- Workshop supply and supplied accessories
- Provide the local supply and ask the installer to check it against the listed 220 V ±15%, 50/60 Hz input, 7.7 kVA rated input power and 30 A rated input current. Request an itemized torch, cable, wire-feed and accessory configuration rather than assuming every shown item is included.
BUYER SEARCH GUIDE
Pulsed MIG/MAG welding equipment
For the documented pulsed MIG/MAG and MMA modes. Match the wire, gas where required, torch and procedure to the intended weld.
Common sourcing language
Importers, distributors, and workshop buyers may describe BAOHUA FYMIG230XL Pulsed MIG/MAG Welder using these related terms:
- FYMIG230XL pulsed MIG MAG welder
- single and double pulse MIG welding machine
- automotive body repair MIG MAG welding center
- MIG MAG and MMA welding equipment
What to compare before ordering
Match the documented single-pulse, double-pulse or MMA mode to the material, thickness and joint. Confirm wire, shielding gas where required, current, duty cycle, supply, torch and accessories for the selected process.
View PAINTING AND CAR BODY REPAIR
Compare related models and choose the configuration that matches your vehicles, process, utilities, and workshop layout.
View categoryBUYER FAQ
FYMIG230XL pulsed MIG/MAG welder FAQ
Review the confirmed product data and the project information needed before requesting a final configuration.
What welding process is stated?
The FYMIG230XL brochure describes a multifunctional pulsed MIG/MAG welding center with single-pulse, double-pulse and MMA modes.
What input power is listed?
The source data states AC 220 V, 50/60 Hz, 7.7 kVA rated input power, and 30 A rated input current.
What duty-cycle values are stated?
The listing states 160 A at 100% duty cycle and 200 A at 65% duty cycle.
What efficiency is listed?
The supplied specification states at least 90% efficiency and a power factor of at least 0.75.
What size and weight are stated?
The source data lists dimensions of 380 x 850 x 810 mm and machine weight of 40 kg.
What information is needed for a quotation?
Provide materials, thicknesses, wire and gas, desired output, duty cycle, power supply, torch and accessory needs, quantity, and destination.