BAOHUA LD-B600 Fuel Injector Cleaner & Analyzer

Injector testing and ultrasonic cleaning in one bench unit

BAOHUA LD-B600 combines a graduated-tube injector test arrangement with a built-in ultrasonic cleaner. The supplied specification lists use with high- and low-resistance injectors. Confirm the injector electrical characteristics, connector type, mechanical adapters and required operating method before purchase.

Observe injector operation with adjustable test settings

The test-tube group supports visual observation of injector condition during testing. The listed test-tube capacity is 100–120 mL. Continuously adjustable system pressure is listed as 0–5.5 kg/cm², with a 2.4 L tank and system flow of 4 L/min. The system-flow figure is an equipment specification and must not be treated as an individual injector delivery result.

Set simulated speed, pulse width and count

The supplied settings list gives 0–9,950 r/min simulated speed in 50 r/min steps, pulse width from 0 to 20 ms in 0.1 ms steps, and a count setting from 0 to 9,950 in steps of 50. Match the test settings and electrical drive requirements to the actual injector and supplied instructions.

Built-in ultrasonic cleaning and fluid handling

The source lists a built-in ultrasonic cleaner, a 10-minute automatic timed ultrasonic program and a discharge tap. It also describes returning test fluid by upturning the test-tube group. Follow the supplied procedure for handling, draining and changing fluids. Confirm approved test and cleaning liquids and obtain their handling information before use.

Prepare the workshop location

The listed working temperature is +5 to +40°C, relative humidity is below 85% and external magnetic-field intensity is below 400 A/m. Provide a stable workbench and suitable service access. Confirm the electrical supply, operating instructions, fluid requirements and complete supplied package before installation.

Select the correct injector application

Send the injector part number, vehicle application, electrical resistance, connector photograph and required test task with the quotation request. Compatibility with a particular GDI injector or diesel common-rail injector has not been established from this source. Request the exact adapters and electrical configuration for the intended injectors.

One-stop workshop equipment supply

BAOHUA can help coordinate injector-service equipment, cleaning and maintenance machines and workshop tools for a new repair business. Send the full equipment list so product matching and consolidated shipping can be discussed together. Confirm the accessory list, packing data, destination and shipment arrangements in the quotation.

Common purchasing questions

**What is the 4 L/min figure?** It is the listed system-flow specification. It is not a guaranteed delivery rate for each injector.

**Does it include ultrasonic cleaning?** The source lists a built-in ultrasonic cleaner with a 10-minute timed program and a discharge tap. Confirm the cleaning accessories and approved fluid in the quotation.

**Which injectors can be connected?** The source lists high- and low-resistance injector testing, but adapter and electrical compatibility must be confirmed for the actual injector. Send the part number and connector details before ordering.

**Are fluids included?** Fluid supply, quantity and handling requirements need confirmation. Request the approved fluid specification and relevant safety information.

Product imagery

Product and detail visuals are illustrative renderings based on the supplied LD-B600 reference, using BAOHUA branding as requested. Confirm the ordered finish and included accessories in the quotation.