BAOHUA FY-9CXL Digital Dent Puller for Steel Body Repair

The FY-9CXL is a digitally controlled dent puller and body-repair spotter for compatible steel vehicle panels. It combines washer and stud attachment for pulling with high-spot and carbon-rod shrinking functions. The supplied brochure describes conventional automotive steel and stainless steel; select the process according to the panel material and vehicle repair instructions.

Digital controls and parameter memory

The microprocessor-based control panel provides welding-time and power adjustment. The brochure describes manual and automatic operation, adjustment of the automatic welding response time, and automatic storage of welding settings. These controls let the operator set up the process for the material and repair task rather than apply one setting to every panel.

Welding, pulling and shrinking functions

• Washer, triangle-washer and OT-washer welding provide attachment points for compatible dent-pulling tools.
• Stud and wavy-wire welding support the pulling methods illustrated in the brochure.
• Direct pulling, spot welding and flattening are listed among the available body-repair functions.
• High-spot shrinking and carbon-rod shrinking are provided for suitable steel-panel repair procedures.
• The brochure describes a pulse function for flattening and shrinking during localized repair.

Gun checking, protection and tool connections

• Welding-gun checking is described as a way to assess the gun operating condition.
• The brochure describes automatic cooling when the welding machine reaches its temperature threshold.
• Automatic mains-voltage monitoring and digitally controlled output are listed in the source material.
• The multifunction pulling hammer is described as insulated; appropriate welding PPE, grounding and safe work practices are still required.
• The welding gun can be used with the illustrated pulling hammer and quick puller, subject to the ordered connections and accessory package.

Standard accessory kit listed in the brochure

• Wavy wire: 5 pcs.
• Carbon rods: 3 pcs.
• Carbon-rod connector: 1 pc.
• Wavy-wire electrode tips: 2 pcs.
• Washer connectors: 2 pcs.
• Triangle washers: 10 pcs.
• Studs: 15 pcs.
• Washers: 15 pcs.
• Earth clamp: 1 pc.
• OT washers: 15 pcs.
• Wrench: 1 pc.
• Toolbox: 1 pc.

The standard-accessory illustrations also show a pulling hammer, welding-gun/cable assembly and a separate cable. The source does not give separate quantities for those illustrated assemblies. Confirm the complete supplied kit in the quotation; do not infer quantities from the number of items pictured.

Precision-repair tools shown separately

• FY9005P two-foot puller: the illustrated bridge-style pulling tool with two support feet.
• F102 small pulling hammer: a compact pulling tool for the selected repair setup.
• F103 high-spot tool: shown for high-spot correction.
• F122 profile gauge: shown for checking panel contour during repair.
• F9208L quick puller: the hand-operated pulling tool illustrated in the precision-repair group.
• F105 gun-cable connection line: shown for the compatible gun connection.
• F107 body file: the panel-working file illustrated in the brochure.

The precision-repair group is presented separately from the standard-accessory table. Confirm which tools, connectors and quantities are included or quoted separately. Do not assume all pictured tools are supplied with every machine.

Workshop applications and material scope

Use cases include compatible steel body-panel dent repair, attachment welding for pulling, and localized shrinking or flattening in collision-repair workshops. Choose a repair method suitable for the panel construction and coating. This is not a universal paintless dent repair system; surface preparation and refinishing may be required. Aluminum repair compatibility is not established by the supplied brochure.

Electrical configuration and equipment dimensions

Specify the ordered 220 V or 380 V configuration at 50 / 60 Hz and confirm phase, circuit protection and cable requirements against the machine nameplate. The brochure separately lists 12 kVA rated input power, 16 A rated input current, 1–13 V output and 3,200 A maximum current. Maximum welding current is not continuous input current.

The main unit measures 22 × 39 × 32 cm and weighs 21 kg. The trolley measures 37.5 × 64 × 94 cm and weighs 14.5 kg. These are component dimensions and weights, not packed shipping dimensions or gross shipment weight. Request the packing list for the selected package.

Source values requiring confirmation

The source welding-time row reads 10–99 s, and its sheet specification is printed as 0.6 + 1.2 mm. Confirm the timing scale, materials and test configuration before operation. The brochure reuses the F006 label inconsistently between an illustration and its table, so the standard consumables above are identified by name and quantity rather than relying on that code.