CAR WASH AND DETAILING
BAOHUA BH-9SF 9-Brush Automatic Tunnel Car Wash System
Model: BH-9SF
Nine-brush conveyor tunnel car wash with transparent side panels, touch-panel controls and integrated pre-wash, foam, brush washing, wax spraying and air drying. Equipment size: 12500 × 4000 × 3000 mm.
Supplied by Guangzhou BAOHUA, a Guangzhou-based automotive workshop equipment supplier with business roots dating back to 1998.
- 9 brushes: 1 top, 4 side long and 4 side skirt brushes
- Pre-wash, foam, brush wash, wax and air drying
- Touch-panel controls and fault self-test
- 12500 × 4000 × 3000 mm equipment dimensions
- Automatic chemical proportioning with metering pumps
Final configuration, specifications, accessories, packaging, and delivery terms are confirmed in the quotation.
PRODUCT DETAILS
Features, construction, and applications
Review the available product detail images for the selected equipment.
TECHNICAL DATA
Specifications
Values below follow the supplied product listing. Confirm the final selected configuration before ordering.
Product specifications
| Model | BH-9SF |
|---|---|
| System type | 9-brush automatic conveyor tunnel car wash |
| Maximum vehicle width | 2300 mm |
| Maximum vehicle height | 2100 mm |
| Vehicle length | Confirm for project layout; no fixed limit stated in brochure |
| Dryer motor configuration | 2 × 5.5 kW + 4 × 4 kW |
| Maximum running power | 28 kW (brochure figure) |
| Starting power | 30 kW (brochure figure) |
| Water consumption | ≤100 L/vehicle (brochure figure) |
| Equipment dimensions (L × W × H) | 12500 × 4000 × 3000 mm |
| Listed installation dimensions | 12500 × 4500 × 3500 mm |
| Brush arrangement | 1 top long + 4 side long + 4 side skirt brushes |
| Suggested supply allowance | 35–40 kW; confirm final load schedule |
| Energy consumption | 0.7 kWh/vehicle (brochure figure) |
| Shampoo consumption | 7 ml/vehicle |
| Water wax quantity | 12 ml listed; dosing basis to be confirmed |
| Listed equipment movement speed | 8.5 m/min |
| Washing time | Adjustable |
| Chemical mixing | Metering pump, automatic proportioning |
Installation requirements
Plan vehicle approach and exit, conveyor layout, foundation, drainage, water treatment, chemical storage and service access. Listed installation envelope is 12500 × 4500 × 3500 mm, excluding additional traffic and utility areas. Confirm voltage, phase, frequency, water and air connections, electrical load schedule and vehicle compatibility for the final configuration.
Product overview
The BAOHUA BH-9SF is a nine-brush automatic conveyor tunnel car wash for commercial car-wash sites. The brush arrangement comprises one top long brush, four side long brushes and four side skirt brushes. It serves compatible passenger cars, SUVs and minibuses within the confirmed vehicle envelope.
Integrated wash process
The system combines high-pressure pre-wash, foam washing, brush washing, spray wax and air drying. Touch-panel controls, a fault self-test system and automatic chemical proportioning through metering pumps support operation. The modular arrangement allows the wash process to be configured for the site.
Equipment and installation dimensions
Equipment dimensions are 12500 × 4000 × 3000 mm (L × W × H). The brochure lists an installation envelope of 12500 × 4500 × 3500 mm. Additional approach, exit, utility and service space is required. Listed vehicle limits are 2300 mm width and 2100 mm height. The brochure does not give a fixed maximum vehicle length; confirm vehicle length and conveyor layout for the project.
Power and drying
Dryer motors are listed as two 5.5 kW units and four 4 kW units. The brochure states maximum running power of 28 kW, starting power of 30 kW and recommends a 35–40 kW supply allowance. Motor ratings and operating-load figures describe different conditions; final electrical design must follow the selected configuration and load schedule.
Consumption and operating settings
Brochure figures are water consumption of no more than 100 L per vehicle, energy consumption of 0.7 kWh per vehicle and shampoo consumption of 7 ml per vehicle. Actual use varies with program, vehicle and water-system configuration. Washing time is adjustable; the listed equipment movement speed is 8.5 m/min and should not be treated as a verified vehicles-per-hour throughput.
MODEL SELECTION
How to choose this equipment
Selection guidance
- Site layout and vehicle flow
- Send a dimensioned site plan showing vehicle entry, conveyor route, exit and the proposed utility area. Start with the listed 12,500 × 4,500 × 3,500 mm installation envelope, then confirm additional approach, exit and service space against the final layout. Equipment dimensions alone do not describe the complete operating site.
- Vehicle envelope and conveyor arrangement
- Provide the longest vehicles, their width and height, and any external accessories. The listed limits are 2,300 mm width and 2,100 mm height; vehicle length needs project-specific confirmation. Ask for the conveyor arrangement and loading instructions for the intended vehicle mix.
- Program, utilities and operating assumptions
- State the intended wash sequence and expected busy-period demand. Ask for the program-specific cycle and loading arrangement rather than converting the listed 8.5 m/min movement speed into vehicles per hour. Confirm water, drainage, chemical supply and the electrical load schedule, distinguishing running power, starting power and the suggested supply allowance.
BUYER SEARCH GUIDE
BH-9SF conveyor car wash selection
BH-9SF integrates pre-wash, foam, brush washing, spray wax and air drying for commercial passenger-vehicle wash operations.
Common sourcing language
Importers, distributors, and workshop buyers may describe BAOHUA BH-9SF 9-Brush Automatic Tunnel Car Wash System using these related terms:
- 9-brush tunnel car wash
- automatic conveyor car wash system
- BH-9SF car wash equipment
- commercial tunnel car washing machine
What to compare before ordering
Compare the nine-brush arrangement, vehicle envelope, site and conveyor layout, drying configuration, utility load and wash program.
View CAR WASH AND DETAILING
Compare related models and choose the configuration that matches your vehicles, process, utilities, and workshop layout.
View categoryBUYER FAQ
BH-9SF tunnel car wash FAQ
Review the confirmed product data and the project information needed before requesting a final configuration.
How many brushes does BH-9SF have?
Nine: one top long brush, four side long brushes and four side skirt brushes.
What are the machine and installation dimensions?
Equipment dimensions are 12500 × 4000 × 3000 mm. The listed installation envelope is 12500 × 4500 × 3500 mm, with extra space needed for approach, exit, utilities and service.
Which vehicles can it wash?
Compatible cars, SUVs and minibuses within 2300 mm width and 2100 mm height. Confirm length, profile and conveyor compatibility for the project.
What power capacity should be planned?
The brochure lists maximum running power of 28 kW, starting power of 30 kW and a suggested 35–40 kW supply allowance. Dryer motors are 2 × 5.5 kW plus 4 × 4 kW. Final electrical sizing requires the selected load schedule.
What consumption figures are listed?
The brochure states water ≤100 L/vehicle, energy 0.7 kWh/vehicle and shampoo 7 ml/vehicle. Actual use depends on program and water-system configuration.
How many vehicles per hour can it wash?
No verified vehicles-per-hour figure is supplied. Washing time is adjustable; the 8.5 m/min movement figure does not by itself establish throughput.