BAOHUA FY-13000 C-Type Gun Spot Welder

The FY-13000 is a multifunctional resistance spot welder with a C-type gun for compatible automotive steel body-panel welding and dent-repair work. The supplied brochure specifies 380 V AC input, 50/60 Hz, 23 kVA rated input power, 65 A rated input current and 13,000 A maximum welding current. These brochure values replace the older website configuration.

The standard NO.2011C-E air-cooled C-type gun is listed at 13,000 A, 500 daN electrode force and 6 kg. The optional NO.2011X-A air-cooled X-type gun is listed at 13,000 A, 350 daN and 5 kg. Select electrode arms for the panel access geometry; confirm the included arms and optional extensions in the quotation. Neither the optional X gun nor the overhead balancer is implied to be standard.

Listed sheet combinations are 3.0 + 3.0 mm for double-sided welding and 1.5 + 3.0 mm for single-sided welding. Output voltage is 1–13 V and the listed electrode diameter is Ø4–9 mm. Match the panel material, coating, joint preparation and vehicle repair procedure to a verified welding setup; a listed thickness does not guarantee suitability for every steel grade or joint.

The graphic LCD and stepless current regulation support parameter selection. The brochure describes automatic mains-voltage monitoring and compensation, overheat protection, 10 preset welding functions and 60 memory functions. Single-sided and double-sided welding, shrinking, washer welding, dent pulling, flattening, wavy-wire welding, stud welding, OT washers and triangle washers are described in the supplied material. Use the corresponding approved tools and consumables.

The articulated gun-cable support allows movement and rotation, and the pictured balancer is optional. An air filter and pressure regulator are described. The brochure prints the air-supply entry as 4–8 kg; confirm the intended pressure unit and operating range in the installation manual rather than treating a mass unit as a complete pressure specification. The timing row lists 0–9990 ms with pulsed operation.

Optional equipment shown includes an electrode sharpener, electrode pressure gauge and welding-current tester. These instruments and the optional guns or arms must be itemized in the order. They are not evidence that a particular machine has passed a purchase-specific test.

The brochure lists 74 × 61 × 180 cm and 168 kg. It does not explicitly identify packed dimensions, net weight, gross weight, crate construction or package count. These shipping fields remain to be confirmed. Do not use the brochure size or weight as a final freight declaration without a packing list. New product artwork is AI-assisted and based on the supplied brochure; it is not a customer installation photograph.